Archive for the ‘upcycling’ Category

Quick Drawstring Bag Tutorial or How to Reuse Your SubEarthan Cottage Soap Wrapping

I wrap my soaps in fabric because it looks nice, it allows the soap to breathe (read here for why), and because it feels better than plastic. I often wonder what happens to the wrapping. I’m sure there are some that toss it. I know of one person who collects the fabric for quilts. For those of you who, like me, don’t want to throw away something that could be useful but don’t know what to do with it, I have a tutorial for a drawstring pouch, just for you.

This is done with the wrapping from one of my soaps, but you could make it in any size you like.

Materials
Cloth wrapper from soap (roughly 8×11 inches)
Jute string from soap (about 29 inches)
Thread

Tools
Needle or Sewing machine
Safety pin or Bodkin
Scissors
Iron

First, iron your fabric flat. Then, fold down a long edge about 3/4 of an inch to one inch and press. This is for the casing. It doesn’t have to be super precise.

Sew a straight seam along the bottom of the flap to form the casing. All the sewing can be done by hand or machine. I have no time or patience, so I choose machine. Fold your material in half with right sides together like a book.

The fold is at the bottom of this photo.

Next, starting just below the casing seam, sew down the side and across the bottom. I use anywhere from a 1/4 to 1/2 inch seam allowance for this. Again, it doesn’t have to be precise.

 With scissors, clip the bottom corners, being careful not to cut your stitching. You could probably skip this step, but it helps the corners look square and crisp. Turn your bag right side out.

Now it’s time to thread the string. Tie one end of the string to a safety pin, large paper clip, or attach a small bodkin. This makes it easier to work it through the casing. Thread it through the casing, safety pin first. 

Once you get the string to the other side, remove your safety pin or other tool and adjust the string so that the ends are even.

 Knot the ends together once or twice to keep it from coming out.

Ta-da! It’s done! Perfect for organizing your purse, storing jewelry or other small items, or as a small gift bag.

Or holding your favorite bar of soap.

Tutorials are always a little complicated to write because it’s easy to overlook small steps in things you do frequently. If something is unclear, please ask. 🙂

If you have any other creative uses for a SubEarthan Cottage soap wrapper, I would love to hear it!

Advertisements

Junkin’ with a Stroller

This morning on the way to school I saw the coolest wood sorter with six bins sitting near a curb on our street for the trash men. I spent the whole rest of the way to school trying to figure out if I could somehow get it home with just the stroller. It was in such good shape I figured it would be gone by the time I made it back, but it wasn’t! I had the bins sort of in/balanced on the stroller basket and the frame over the stroller handles when the lady who was getting rid of it came out and offered to help me carry it home. Smile

Here it is:

 IMG_4585IMG_4586IMG_4587

I’m so glad I picked it up. I knew it was nice, but I didn’t realize just how solid and heavy. I still haven’t decided if it will be for toys or the craft room. For now, it’s sitting in the living room and Beckett is busying himself rearranging the bins.

Nap Time T-shirt to Tunic Dress Thing Refashion

I should really start taking more pictures before I start a project. During would be good, too, but at least a before and after shot. I also need to find my tripod and/or maybe just wait until someone other than Beckett is home to take pictures.

Anyway, here’s the final product:

IMG_4518I’m not sure what my crazy child was doing at the time, but it must have been cute.

It’s pretty straightforward: Two similarly sized/shaped/weighted t-shirts cut across the middle and the bottom of one sewn into the middle of the other. The shirts were pretty big to begin with, so the end result looked like a sack. I serged the sides in about an inch per side with the end result being a slightly less big sack. Not something I see myself wearing out much, but for around the house or running Finn to and from school (hence the super-flattering sneakers) it will get some use. More than the original boxy, awkward t-shirts anyway.

Nap Time Yoga Pants Refashion

This morning I threw on a pair of black Danskin boot cut yoga pants for the walk to school. They were some of the first new pants I bought after Beckett was born. They fit a little big now, except for the length. They were now cropped in a less fashionable, more “look at my ankle” sort of way.

After seeing some pants to leggings tutorials, I decided that was the way to go. With fall arriving any day now (please!), leggings will get more use for under skirts and with tall boots.

I didn’t take any before pictures. This is the inspiration tutorial. Instead of only trimming from the inseam, it looked better if I took some from along the outside, too. To keep it even, I did one leg, tried them on to make sure it fit, then folded them in half and used the finished leg as a pattern for the other leg. I had planned to add a cuff using the fold over waistband. It was black on one side and grey with multicolored stripes on the other. I thought it would be cute and add length. I tried it on one side, and decided I didn’t like the way it looked. With the tighter fit, they actually stay down at my ankles anyway.

IMG_4477

The left leg is rolled up to show where the yoga pants were hitting me. Not a flattering look with a boot cut.

One thing that’s really nice about making the leggings this way is that the yoga pant’s fabric was heaver than most leggings, so they offer more coverage as long as they don’t get stretched too tight. Definitely cut a little bigger than you think. You can always take more off easier than fixing something that is too small.

 IMG_4475

Side note about the shirt I’m wearing: I really want to do something to make it less boxy, but I can’t. I’m afraid I might make it un-wearable. Normally that wouldn’t matter too much with a free t-shirt. This one is special, though. Right after Beckett was born, Finn and my mom went to the grocery store to get a few things we needed at home. Someone offered Finn a free t-shirt. He politely turned it down, but then said that maybe his mom would want one, so they gave him one for me. For a while afterward, any time I wore this shirt, his face would light up and he’d say “You’re wearing the shirt I got you!” So, yeah, I will probably wear this shirt as-is until it starts falling apart. Then I’ll turn it into a pillow or something to keep forever.

Also, Beckett just woke up from his nap, hence the no-pants look.

I did learn just how sharp my fabric scissors are while working on this project. I was snipping some threads at the end and managed to catch my finger. I can totally vouch for their razor-sharpness.

IMG_4484

T-Shirt to TV Pants

I went on a little Pinterest binge a couple days ago looking for ideas to help clear my refashion stash. Saturday night I decided to make a pair of yoga pants out of a t-shirt using this tutorial. I wear a size eight on average, and used an XL adult t-shirt.

I did make a few changes to the design. First, instead of cutting the shirt down the middle, I cut it down the sides from the middle of the underarm to the hem. This also means you’ll have an inseam and no side seams. That keeps any design on the front or back intact and moves them to the hips. For the waistband, I cut the underarm seam from the sleeves and squared them up to be two equal rectangles, leaving the hem intact. I sewed the short sides together making a big, short tube from the sleeves. I then put the tube inside the waist of the pants with the pants right side out and the right side of the tube facing the inside of the pants. The raw edge of the tube lines up with the raw edge of the pants. I serged the top together like that. This made it so when the tube is folded down to the outside, the seam is covered.

IMG_4449IMG_4452IMG_4459

Sorry for the awkward pictures. No one was around to take the pictures and Doctor Who was about to start.

I sewed it all on my serger and it took less than ten minutes. I probably should have added two minutes and switched from white to black thread. Or not.

They are a little loose at the waist. If I were planning to actually do yoga or wear them in public I should probably add some elastic at the seam. Since they will probably be used mainly for watching Doctor Who while sitting on the sofa, I probably won’t bother.

Stay Puft Costume round up.

Here’s the final Baby Stay Puft (or Sweetpea or little sailor) costume. Not too bad. 🙂

To see how I did it:
Phase 1
Phase 2.1
Phase 2.2
Phase 2.3
Phase 3

Beckett’s Costume – Phase 3

Phase 3 is the accessories. Beckett was sick Friday night and Saturday morning, so I was in a rush to finish everything in between him needing mommy cuddles to feel better. I didn’t get as many step by step pictures, but really, they are just a bib and a baby hat. If you are trying to make a similar costume, there are a million different hat and bib tutorials out there by people better at writing tutorials than me.

I agonized the whole time  over how to make a hat like Mr. Stay Puft’s. I finally decided to make it easy on myself and do a simple baby hat inspired by the original. Honestly I think it looks a little wonky, so you may want to find a different way to do it. Here’s how I did Beckett’s, though.

I measured Beckett’s head (18 inches) and divided the measurement by three (6 inches). Then I traced one of Finn’s knit caps on a sheet of paper. I centered six inches on the bottom line and slimmed down Finn’s hat pattern to make my pattern piece. That probably makes no sense to anyone but me. The pattern piece is on the right side of the photo, so maybe seeing it will help.

 I cut three pieces from the leftover sleeve pieces using the pattern and surged them to make the hat.

I cut a strip of navy fleece to make a band/cuff for the hat. Before sewing it to the hat, I used iron on letters to write “Stay Puft”. Then I sewed it into a circle and attached it to the hat. I sewed red ribbon to the top and tacked it so it falls properly.

The bib is based on a pattern I made from one of Beckett’s bibs. I squared off the bottom similar to Mr. Stay Puft’s collar. I used some random navy fabric from my stash, white ribbon for the trim, Velcro for the closure and the same red ribbon I used on the hat for the tie.

 Rather than make the tie s separate piece, I knotted it and stitched it to the back of the bib.

Tomorrow I’ll take a picture of the whole outfit on my little marshmallow. For now, I’ll leave you with this:

Phase 1, Phase 2.1, Phase 2.2, Phase 2.3

%d bloggers like this: